Design Engineer's Handbook

Friday, November 27, 2015

ORTHOGRAPHIC PROJECTIONS



 
 
Posted by Unknown at 11:37 PM No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Newer Posts Older Posts Home
Subscribe to: Posts (Atom)

About Me

Unknown
View my complete profile

Blog Archive

  • ▼  2015 (4)
    • ▼  November (3)
      • DRAWING STANDARDS
      • PRINCIPLES OF ORTHOGRAPHIC PROJECTIONS
      • ORTHOGRAPHIC PROJECTIONS
    • ►  December (1)
  • ►  2016 (2)
    • ►  January (2)

Translate

Popular Posts

  • Selection of Fits
    From the above it will be realized that are a very large number of combinations of hole deviation and tolerance with shaft deviation...
  • Engineering Communication (Dimension Tolerances)
    Tolerance Important to interchangeability and provision for replacement part It is impossible to make parts to an exact size. T...
  • Engineering Communication (Standard Abbereviations)
    STANDARD ABBREVIATIONS Standard abbreviations in draughting are recommended as notes to provided a brief and clear instructions. ...
  • PRINCIPLES OF ORTHOGRAPHIC PROJECTIONS
      DESIGNATION OF VIEWS View in direction A = View from front or front view View in direction B = View from above or to...
  • ORTHOGRAPHIC PROJECTIONS
       
  • DRAWING STANDARDS
    DRAWING SHEET SIZE (As per IS 696 – 1972) (1) PRINCIPLES OF BASIC PAPER SIZES -----------------------------------------------...
Simple theme. Theme images by Kativ. Powered by Blogger.